cms.avientek.com

Brand: TOA

  • VX-300LO

    The VX-300LO is designed to deliver a high-quality line level audio output, serving as a reliable alternative to a standard amplifier module. Ideal for professional audio systems, the VX-300LO enables direct integration with external amplification or signal processing equipment where onboard amplification is not required. This makes the VX-300LO a suitable choice for installations demanding precise control over signal routing and amplification stages. Engineered to maintain audio integrity across connected devices, the VX-300LO ensures consistent performance in a wide range of commercial and industrial sound applications. By providing a stable line level output, the VX-300LO supports flexible system configurations and simplifies integration within complex audio infrastructures. Its application is particularly effective in environments where centralised amplification is preferred or where scalability is a key consideration. The VX-300LO represents a dependable component within any modular audio solution, ensuring compatibility and efficiency in professional-grade audio installations.

    • Line level output module
    • Use of active loudspeakers
    • Recording
    • Amplifier for non-emergency applications, e.g. for subwoofers
    • To be installed instead of ampilifier module
    • Transformer-balanced
    • Volume control
  • VX-050DA

    VX-050DA

    The VX-050DA is a digital power amplifier designed specifically for integration with the VX-3000 series systems and complies with the European Standard EN54 for voice alarm and fire detection applications. This amplifier module delivers a single channel of Class D digital amplification, supporting energy efficiency and a lightweight system design. The VX-050DA includes a standby mode feature that helps minimise power consumption when the unit is not active. As a modular component, it operates in conjunction with dedicated control units, including the VX-3004F, VX-3008F, and VX-3016F, as well as the VX-3000DS power supply unit. Its design prioritises operational reliability and system efficiency, making the VX-050DA suitable for building safety infrastructure where performance and compliance are critical.

    • Low loss modular class-D amplifier
    • Modules to be mounted in the frame units
    • Power level: 500 W
    • Can easily be removed or replaced simply by unplugging them; no need for special tools
    • Dust filter, easy to clean
    • 100 V Output without transformer resulting in light-weight units
    • Fuse easily accessible from rear
  • VX-030DA

    VX-030DA

    The VX-030DA Digital Power Amplifier is a single-channel, Class-D amplifier designed for integration within the VX-3000 voice alarm system. Fully compliant with EN54 standards for fire detection and alarm systems, the VX-030DA supports critical communication in emergency situations. Its modular construction ensures efficient installation and contributes to a compact, lightweight configuration. Engineered with energy efficiency in mind, the VX-030DA features a standby mode to reduce power consumption during periods of inactivity. This amplifier requires connection to compatible control units, specifically the VX-3004F, VX-3008F, or VX-3016F, as well as the VX-3000DS power supply unit, to operate as part of the overall system. The VX-030DA provides reliable audio amplification for public address and voice evacuation, making it suitable for safety-critical applications in commercial and industrial environments.

    • Low loss modular class-D amplifiers
    • Modules to be mounted in the frame units
    • Rated power at 100 V: 300 W
    • Can easily be removed or replaced
    • Dust filter, easy to clean
    • 50/70/100 V Output without transformer resulting in light-weight units
    • Fuse easily accessible from rear
  • VX-015DA

    VX-015DA

    The VX-015DA is a digital power amplifier designed for integration within VX-3000 voice alarm systems and meets the requirements of the EN54 standard for fire detection and alarm systems in buildings. This module-based amplifier offers a single channel of Class D amplification, supporting efficient power use and a lightweight structure. The VX-015DA includes a standby function that helps minimise power consumption when not actively operating. Its compact form and energy-conscious design make it suitable for demanding safety-critical environments. To function correctly, the VX-015DA must be used with the appropriate control units, including the VX-3004F, VX-3008F or VX-3016F, along with the VX-3000DS power supply unit. The VX-015DA provides reliable audio amplification for public address and voice evacuation systems, ensuring consistent performance in emergency communication applications.

    • Low loss modular class-D amplifiers
    • Modules to be mounted in the frame units
    • Rated power at 100 V: 150 W
    • Can easily be removed or replaced
    • Dust filter, easy to clean
    • 50/70/100 V Output without transformer resulting in light-weight units
    • Fuse easily accessible from rear

  • VX-3016F

    The VX-3016F is a rack-mounted control unit engineered for managing voice evacuation announcements within TOA’s VX-3000 Series, which complies with EN54 standards for fire alarm systems. Designed to integrate with optional power amplifier modules, the VX-3016F can transmit amplified audio signals to 16 speaker output zones. It supports high-priority Emergency Warning Broadcasts, with the capability to run two emergency broadcast patterns simultaneously. The unit features advanced digital signal processing for precise acoustic tuning, an automatic feedback suppressor, VOX-triggered broadcasting, and an ambient noise control (ANC) function that intelligently distinguishes between output audio and environmental noise. Network compatibility enables distributed system configurations, while status indicators display fault and amplifier signal conditions. Up to two amplifier modules can be mounted, either for zone amplification or in combination with standby functionality. System scalability is achieved through unit interconnection, and standby amplifiers can be shared across VX-3000F units via dedicated input and output terminals.

    • Up to 2 amps (16 switched zones + standby amp or 2 x 8 switched zones)
    • All mandatory indications by EN54-16
    • Status indication for each speaker line
    • Fault acknowledge and lamp test button
    • Input DSP: flexible filtertypes and compressor
    • Output DSP: flexible filtertypes, compressor and delay up to 2.7 sec

  • VX-3008F AMQ

    The VX-3008F AMQ is an advanced control unit within the VX-3000 Series rack-mounted voice evacuation system from TOA, engineered to meet EN54 compliance for fire alarm applications. This unit enables management of voice evacuation broadcasts, including simultaneous activation of two emergency messages and prioritisation of emergency warning announcements. With eight speaker output channels, it supports up to three power amplifier modules, including standby amplifier capability. The VX-3008F AMQ incorporates digital signal processing for optimal audio quality, automatic feedback suppression, VOX-triggered broadcasting, and ambient noise control that differentiates environmental sound from system output. Its matrix output allows 2-bus speaker zone configuration, enabling both 1-bus and 2-bus zones to function within a single system. Networking compatibility supports distributed installations, and system expansion is achievable by linking units with or without amplifiers. LED indicators display operational and fault statuses, while the standby amplifier input and output terminals facilitate amplifier sharing between connected VX-3000 Series units.

    • Up to 3 amps (8 zones switching between 2 amps + standby amp or 8 zones freely assignable to 1 of 2 amps)
    • All mandatory indications by EN54-16
    • Status indication for each speaker line
    • Fault acknowledge and lamp test button
    • Input DSP: flexible filtertypes and compressor
    • Output DSP: flexible filtertypes, compressor and delay up to 2.7 sec

  • VX-3004F AMQ

    The VX-3004F AMQ is an advanced control unit engineered for managing voice evacuation announcements within the VX-3000 Series rack-mounted system by TOA, which complies with the EN54 standard for fire alarm voice systems. Designed for integration with optional power amplifier modules, the VX-3004F AMQ features audio input terminals and supports amplified signal output to speaker lines. It allows emergency warning broadcasts to take priority over standard emergency messages and supports simultaneous activation of two emergency broadcast patterns. Network compatibility enables distributed system configurations. Key functions include digital signal processing for optimised sound adjustment, a feedback suppressor to reduce acoustic feedback, a VOX function for audio-triggered broadcasts, and ambient noise control that distinguishes between system output and background sound. The VX-3004F AMQ offers four speaker outputs, each with A and B line redundancy, and supports up to four amplifier modules, including standby amplifier input and output for shared standby use across multiple units.

    • Up to 4 amps (1 zone – 1 amp, 4 AB-zones or 3 AB zones + standby amp)
    • All mandatory indications by EN54-16
    • Status indication for each speaker line
    • Fault acknowledge and lamp test button
    • Input DSP: flexible filtertypes and compressor
    • Output DSP: flexible filtertypes, compressor and delay up to 2.7 sec.

  • IT-450

    The IT-450 is a compact module specifically engineered for direct installation onto a circuit board, serving to convert unbalanced input or output signals into balanced formats. This function is essential in professional audio and electronic systems where maintaining signal integrity and minimising interference are critical. By enabling balanced signal transmission, the IT-450 supports improved noise rejection and consistent performance across various applications. Its integration into circuit board assemblies allows for streamlined signal management without the need for external conversion equipment. Designed for reliability and technical efficiency, the IT-450 offers a practical solution for OEMs and system integrators requiring robust signal adaptation within confined electronic environments. The IT-450 is well suited to a wide range of commercial and industrial settings where precise signal conversion is required as part of a larger electronic architecture.

  • WB-RM200

    WB-RM200

    The WB RM200 Wall Mounting Bracket is designed for secure installation of the RM 200M, RM 200SA, and RM 210 units in fixed wall locations. Manufactured from surface-treated steel with a black painted finish, the WB RM200 offers a durable and professional mounting solution suitable for commercial and industrial environments. The bracket is supplied with a full set of rack mounting screws to ensure a stable and reliable fit. Weighing approximately 100 grams, the WB RM200 is lightweight yet robust, ensuring long-term performance without adding significant load to the installation surface. This bracket enables efficient use of space while maintaining easy access to connected devices. Designed specifically for compatibility with the RM 200M, RM 200SA, and RM 210, the WB RM200 supports consistent integration into existing systems. Ideal for integrators and installers, the WB RM200 Wall Mounting Bracket delivers dependable support for essential communication equipment.

  • RM-300MF

    The RM-300MF Fireman’s Microphone is specifically developed for integration with the VM-3000 Series voice alarm system. This unit includes a dedicated emergency activation key, enabling authorised personnel to trigger pre-recorded alert and evacuation messages, as well as deliver live voice announcements during critical incidents. The microphone supports enhanced operational flexibility in emergency communication scenarios. To extend functionality, the RM-300MF Fireman’s Microphone can be connected to the RM-320F extension unit, which provides additional programmable function keys. These keys can be configured for tasks such as zone selection or system fault acknowledgement, allowing users to manage site-specific emergency response requirements more effectively. Designed for reliability in demanding environments, the RM-300MF Fireman’s Microphone is a key component for facilities requiring compliant and dependable emergency broadcast capabilities within the VM-3000 Series architecture.

    • Exclusively for broadcasts made by firemen in emergency situations
    • For activation of emergency mode, start and stop automatic broadcasts of emergency announcements, reset emergency signals and live microphone announcements
    • CPU-switch for emergency broadcast to all zones even in case of a CPU error.